Assessment Validation: A Beginner's Guide to Validating Assessments

Assessment Validation: A Beginner's Guide to Validating Assessments

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.

Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.

According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

We are required by the standards to carry out two types of validation.

The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.

Defining the Two Types of Assessment Validation

An Introduction to Assessment Validation

As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

Our focus here will be on assessment tool validation.

Steps to Perform Assessment Tool Validation

After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.

When Should You Conduct Assessment Tool Validation?

The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.

You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- you update resources
- add new training products on scope
- review your course against training product updates
- you identify your learning resources as a risk during your risk assessment

ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.

Choosing Training Products for Validation

Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.

Resources Needed to Start Assessment Tool Validation

Learning Resources

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.

Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.

Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item exist. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.

Validation Panel

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

Your validation panel must, as a group, possess:

Relevant vocational competencies and industry skills applicable to the unit being validated

Current expertise and skills in vocational teaching and learning

Any one of these training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its updated version

Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists with the validation process and documentation. It makes it easier to view how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It can also serve as proof that you have validated your resources before allowing students to use them.

While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.

Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they often result in judgment errors due to limited space for comments on each assessment item.

We recommend using a more detailed template to examine each unit requirement and the assessment items that correspond to them. Here is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Check?

As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.

Principles of Assessment
Fairness – Are equal opportunities and access ensured in the assessment process?

Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?

Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment produce the same results each time, regardless of who conducts the training? Will different assessors make consistent decisions on skill competence?

Evidence Key Rules

Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work is the candidate’s own?

Currency – Are the assessment tools updated to reflect current units of competency and industry practices?

Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:

Walk the Talk

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

diaper changing

prepare bottles, feed babies from bottles, and clean equipment

solid food prep and feeding babies

respond appropriately to baby signs and cues

prepare babies for sleep and settle them

monitor and encourage suitable physical exploration and gross motor skills for the age

Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.

Complete Compliance or Not Competent

Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be Clearer

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

The answer can include:

Essential resources

Related costs

Time allocated for activities

Assigned roles and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Possible answers could include, but are not limited to:

Weather conditions – here isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolation, use of engineering controls

People – isolating, engineering controls, administration

Structural hazards – substitution, isolation, use of engineering controls

Chemical hazards – isolation, engineering controls, administration

Equipment or machinery – isolating, engineering controls, administration

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.